Safety Information For Instruments Not Manufactured By Thermo Fisher Scientific; Instrument Safety; General; Physical Injury - Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual

H
Appendix H Safety

Safety information for instruments not manufactured by Thermo Fisher Scientific

Safety information for instruments not manufactured by Thermo
Fisher Scientific

Instrument safety

General

Physical injury

Electrical safety

230
Some of the accessories provided as part of the instrument system are not designed or
built by Thermo Fisher Scientific. Consult the manufacturer's documentation for the
information needed for the safe use of these products.
CAUTION! Do not remove instrument protective covers. If you remove the
protective instrument panels or disable interlock devices, you may be exposed
to serious hazards including, but not limited to, severe electrical shock, laser
exposure, crushing, or chemical exposure.
CAUTION! Moving Parts. Moving parts can crush, pinch and cut. Keep hands
clear of moving parts while operating the instrument. Disconnect power before
servicing.
WARNING! Ensure appropriate electrical supply. For safe operation of the
instrument:
·
Plug the system into a properly grounded receptacle with adequate current
capacity.
·
Ensure the electrical supply is of suitable voltage.
·
Never operate the instrument with the ground disconnected. Grounding
continuity is required for safe operation of the instrument.
WARNING! Power Supply Line Cords. Use properly configured and approved
line cords for the power supply in your facility.
WARNING! Disconnecting Power. To fully disconnect power either detach or
unplug the power cord, positioning the instrument such that the power cord is
accessible.
SeqStudio Genetic Analyzer Instrument and Software User Guide
™