9
Add a custom dye calibration to the Plate Manager
Download a plate setup template as a CSV file
122
Manage the software (Plate
■
■
■
■
■
■
Delete plate setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
■
■
Manage run modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
■
Manage size standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
■
On the instrument:
1. Open a plate setup that specifies the custom dye set of interest.
2. Export a plate setup that specifies the custom dye.
3. Open the exported plate setup in the Plate Manager.
The custom dye is imported and is available for selection when you create new
plates.
1. Click
to display the home screen.
2. Click New, select Create from template, then click Download for the template of
interest.
Note: You cannot add plate setups to the list of templates. However, you can create a
plate setup with "Template" suffix, and use it as a starting point for creating new plate
setups.
SeqStudio
Genetic Analyzer Instrument and Software User Guide
™
Manager)