Shared (Public), Hidden (My Plates), And Guest Plate Setup Files; Overview Of Plate Setup Settings - Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual

Shared (public), hidden (my plates), and guest plate setup files

Create by
setting Plate
Accessible to
setup
users...
security to...
Shared All users, including
guest
Note: If a guest user edits a shared plate setup, the plate must be saved under a new name, and the Plate setup
security is set to Hidden and cannot be changed.
Hidden Only the user who
created the plate
setup
Guest plate Guest user only
setup
security is
automatically
set to Hidden
and cannot
be changed

Overview of plate setup settings

Category
Plate
SeqStudio Genetic Analyzer Instrument and Software User Guide
™
Stored in folder on
instrument...
Public
My plates
My plates
Setting
• Plate properties
• Plate set up security (Shared or Hidden)
• File name convention
• Analysis settings
Chapter 6 Create or modify a plate setup from the instrument

Shared (public), hidden (my plates), and guest plate setup files

Analysis settings used...
Analysis settings saved in
the plate setup
Last settings specified by the
signed-in user (not saved
with plate setup)
Last settings specified by the
signed-in user (not saved
with plate setup)
The analysis settings are saved with the plate
setup as follows:
• Hidden plates—The analysis settings are
saved with the plate setup, and are used
the next time that you open or create a
hidden plate. The analysis settings will
not be available to other system users.
• Shared plates—The analysis settings are
saved with the plate setup, and are used
the next time that you open or create a
shared plate. The analysis settings will
be available to other system users.
User‑created analysis settings:
• Users can name and save analysis
settings.
• If you create analysis settings in the
instrument software, the settings will
not be available to other users.
6
File name convention
used...
Last settings specified
by the signed-in user
(not saved with plate
setup)
Last settings specified
by the signed-in user
(not saved with plate
setup)
Last settings specified
by the signed-in user
(not saved with plate
setup)
Notes
79