Chapter 2 Prepare The Samples And The Instrument; Power On The Instrument; Sign In - Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual

2

Chapter 2 Prepare the samples and the instrument

Power on the instrument

Power on the instrument

Sign in

34
IMPORTANT! Do not power on the instrument until it has been installed and set up
by a Thermo Fisher Scientific representative.
Press the On/Off switch on the rear panel.
The instrument does not maintain the correct temperature conditions for
IMPORTANT!
the cartridge when it is powered off. Avoid cartridge exposure to ambient
temperature.
1
On/Off switch
1. If another user is signed in, touch
2. In the Sign in screen, touch the down arrow.
3. Touch your instrument profile, then enter your PIN.
Note: If the instrument is left unattended for 120 minutes, the instrument profile
is signed out.
1
in the home screen, then touch Sign out.
SeqStudio Genetic Analyzer Instrument and Software User Guide
™