Loading A Project Created Offline To The Compactflash Card - Siemens SIMOTION D410 Series Commissioning Manual

4.2.6

Loading a project created offline to the CompactFlash Card

Procedure
You can use a card reader to write the entire project to the CompactFlash Card, even in
offline mode. In SIMOTION SCOUT, you can call the "Download to the file system" function
in the context menu of the SIMOTION device.
1. Save and compile the project.
2. Switch off the SIMOTION D410.
3. Remove the CompactFlash Card and insert it in a card adapter. The card adapter must
4. In the SCOUT project, select the SIMOTION D410 device that you want to download to
5. Click "Download to the file system" in the context menu. A dialog box opens.
6. In the "Download to the file system" dialog, select the "Save normal" option and click the
7. Select the target drive.
8. Confirm your entries with "OK". The data will be written to the CompactFlash Card.
9. Remove the CF card and insert it in the D410 slot.
10. Switch on the D410. The D410 starts with the downloaded project.
D410
Commissioning Manual, 05/2009
be connected to a programming device/PC.
the CompactFlash Card.
"Select target" button.
Note
The components' firmware is automatically updated, depending on the FW version on the
SINAMICS components and on the CompactFlash Card. During an FW update, please
take note of the messages and alarms in the SIMOTION SCOUT detail window. An FW
update on the SIMOTION D410 is signaled by the RDY LED flashing yellow, while on the
DRIVE-CLiQ components (TM, SMC, etc.) it is signaled by the RDY LED flashing
red/green.
• FW update running: RDY LED flashes slowly (0.5 Hz)
• FW update complete: RDY LED flashes quickly (2 Hz)
Go offline once all the FW updates are complete, then switch the 24 V supply for the
upgraded initialization components off/on.
Commissioning (software)
4.2 Configuring the system in offline mode
71