Configuring The Startup Parameter Of The Cpu Before Copying The Project To The Memory Card; Transfer Card - Siemens S7-1200 System Manual

4.5.2 Configuring the startup parameter of the CPU before copying the project to the
memory card
When you copy a program to a transfer card or a program card, the program includes the
startup parameter for the CPU. Before copying the program to the memory card, always
ensure that you have configured the operating mode for the CPU following a power-cycle.
Select whether the CPU starts in STOP mode, RUN mode, or in the previous mode (prior to
the power cycle).
4.5.3

Transfer card

NOTICE
Protect memory card and receptacle from electrostatic discharge
Electrostatic discharge can damage the memory card or the receptacle on the CPU.
Make contact with a grounded conductive pad and/or wear a grounded wrist strap
whenever you handle the memory card. Store the memory card in a conductive container.
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
PLC concepts
4.5 Using a memory card
127