Loading The Project Into The Programming Device; Load Cpu To Project - Siemens SIMATIC S7-1500 Getting Started

Software section

3.4 Loading the project into the programming device

3.4 Loading the project into the programming device
3.4.1

Load CPU to project

Introduction
You can create a new station including the actual values from the hardware configuration
and the user program.
Procedure
1. Open the dialog for loading from the CPU.
2. Select the interface with which the programming device is connected to the CPU. The
search for accessible nodes starts automatically.
3. Load the CPU in the project.
110
Getting Started, 05/2014, A5E03981761-AC
S7-1500