Siemens SIMOTION D410 Series Commissioning Manual page 105

3. Select the source for process data word 1 (PZD1), indicated by a blue icon. Under
4. Now interconnect analog inputs AI 0 and AI 1 in the same way (r4055[0] and r4055[1],
How to transfer a signal from SIMOTION to TM31 (PROFIBUS receive direction):
D410
Commissioning Manual, 05/2009
"TM31", select "More interconnections..." followed by "r4022 - CO/BO: TM31 digital inputs
status".
Figure 4-30 Selecting the PSD
current value in percent; 100% = 4000 hex).
Figure 4-31 Interconnecting the TM31 digital and analog inputs
Commissioning (software)
4.9 Configuring drive-related I/Os
105