Starting Automatic Configuration - Siemens SIMOTION D410 Series Commissioning Manual

4.3.3

Starting automatic configuration

Prerequisites
● You activated the online connection to SINAMICS Integrated.
● You have not yet configured any drive objects.
● The default settings of SINAMICS Integrated were activated.
Procedure
1. Open the "Automatic Configuration" dialog box by selecting the "SINAMICS_Integrated >
2. Click "Start automatic configuration".
3. Select either a servo or a vector drive object.
D410
Commissioning Manual, 05/2009
Right-click SINAMICS Integrated" and select the "Target device" > "Restore defaults"
command from the shortcut menu in SIMOTION SCOUT in order to restore the factory
settings.
Automatic configuration" command in the Project Navigator.
Figure 4-12 Starting automatic configuration
The "Drive Object Type" dialog box opens.
Figure 4-13 Selecting the drive object type
Commissioning (software)
4.3 Configuring the system in online mode
75