Siemens SIMOTION D410 Series Commissioning Manual page 58

Commissioning (software)
4.1 Overview of commissioning
Observe the corresponding references.
This chapter also contains additional configuration information, e.g. for vector drives,
Safety Integrated, etc.
Downloading projects/Copying from RAM to ROM
Please note the following behavior concerning SIMOTION SCOUT's online functions:
Icon
58
Function
Downloading the project to the target
system
Downloading the CPU/drive unit to the
target device
Downloading the CPU/drive unit to the
programming device
Copying RAM to ROM
Effect
Downloads the programs to the
SIMOTION device as well as the
configuration for the SINAMICS
Integrated.
The configuration is only downloaded to
the device selected in the project tree
(which means that the function needs to
be performed separately for each D410
and SINAMICS Integrated).
The unit configuration is downloaded to
the programming device selected in the
project tree (which means that the
function needs to be performed
separately for each D410 and SINAMICS
Integrated).
Copying from RAM to ROM is only
performed for the device selected in the
project tree (which means that the
function needs to be performed
separately for each D410 and SINAMICS
Integrated).
Commissioning Manual, 05/2009
D410