Siemens SIMOTION D410 Series Commissioning Manual page 67

Advantages of DSC (compared to a position controller in the control unit):
● Higher Kv (position controller gain) possible
● Larger bandwidth and consequently higher dynamic response
● Shorter response times for disturbance characteristic
The DSC dynamic drive control can be used for the SIEMENS message frame 105, PSD-
10/10 and SIEMENS message frame 106, PSD-11/15. The DSC is activated by default for
the configuration of the axis using the Drive Wizard.
Detailed information for the various message frame types can be found in the
Control, TO Axis Electric / Hydraulic, External Encoder
Figure 4-8
A "Summary" dialog box opens with a listing of all settings after you completed all settings in
the Drive Wizard. You can now choose to activate your settings by clicking "Finish", or to
return to the component configuration for further editing.
D410
Commissioning Manual, 05/2009
Selecting the PROFIdrive message frame
Commissioning (software)
4.2 Configuring the system in offline mode
Function Manual.
Motion
67