Siemens SIMOTION D410 Series Commissioning Manual page 15

PROFINET
SIMOTION D410 PN can communicate via PROFINET interface to the following
components:
Table 1- 3
Components
The master computer (at
company and production
management level)
PG/PC programming device
SIMATIC HMI device
Drive units with PROFINET
interface (e.g., SINAMICS S120
with CBE20)
Other controls (e.g. SIMOTION
or SIMATIC)
Distributed I/O systems
SIMATIC ET 200M
SIMATIC ET 200S
SIMATIC ET 200pro
Other PROFINET I/O
Gateways
Note
Note that only one real axis can be used on a SIMOTION D410.
D410
Commissioning Manual, 05/2009
Components on PROFINET
Function
... communicates with other devices via Ethernet.
... communicates with the SIMOTION SCOUT Engineering
Systems (ES), STEP 7 and HMI (Human Machine Interface).
... is used for operator control and monitoring functions. It is not
absolutely essential for running SIMOTION D410.
... convert speed setpoints into signals for controlling the motor
and supply the power required to operate the motors.
Modular I/O system for control cabinet installation and high
channel densities.
Finely scalable I/O system for control cabinet installation and
particularly time-critical applications; including motor starters,
safety technology and individual grouping of load groups.
Modular I/O system with IP65/IP67 rating for machine-related
applications with no control cabinet; with new features such as
more compact designs, integrated PROFIsafe safety technology,
PROFINET connection and live module replacement.
IE/AS Interface Link PN IO for the PROFINET IO gateway to
•
AS Interface
PN/PN coupler to connect two PROFINET IO networks
•
Description
1.2 System components
15