Deleting Data; Overview Of Data Deletion - Siemens SIMOTION D410 Series Commissioning Manual

You have the following options for backing up the current values of retain variables to the
CompactFlash Card:
● In the user program
● Using a switch position (SIMOTION D410 service selector switches) or IT DIAG
With the SCOUT functions "Back up variables" and "Restore variables", you also have the
option of backing up to your PC and restoring data that were changed during operation and
only stored in the runtime system.
Execute the "Copy RAM to ROM" function separately for SINAMICS Integrated. This
requires that the drive element has been selected in the Project Navigator.
See also
Properties of the user memories (Page 32)
4.14

Deleting data

4.14.1

Overview of data deletion

You can define the scope of data to be deleted from SIMOTION D410 memory described in
the "user memory concept". That is, you can choose to delete all data or only specific parts.
You have the following options of deleting data from SIMOTION D410:
● For information on performing a SIMOTION D410 memory reset, refer to the section titled
● For information on deleting user data on a CompactFlash Card, refer to the section titled
● For information on restoring the SINAMICS Integrated to its factory settings, refer to the
● For information on setting the SIMOTION D410 to its factory settings, refer to the section
D410
Commissioning Manual, 05/2009
Use the "_savePersistentMemoryData" system function for this purpose.
For information on this, refer to the section titled Diagnostic data and non-volatile data
(Page 172).
Resetting the memory of SIMOTION D410 (Page 130).
Deleting user data from the CompactFlash Card (Page 133).
section titled Restoring the default settings of SINAMICS Integrated (Page 134).
titled Restoring the default settings of SIMOTION D410 (Page 134).
Commissioning (software)
4.14 Deleting data
129