Siemens SIMOTION D410 Series Commissioning Manual page 41

4. Select the PROFINET interface from the "Properties" dialog box and confirm your
5. The connection to the programming device / PC is activated automatically and HW Config
Representation in HW Config
SIMOTION D410 is represented in HW Config.
Figure 3-2
Additional references
You can find additional information on the subject of going online in
Applications
SIMOTION SCOUT scope of delivery.
D410
Commissioning Manual, 05/2009
selection with "OK".
opens.
Note
The active state setting of the connection to the programming device / PC is only
visualized in NetPro!
Image of a SIMOTION D410 PN in HW Config
SIMOTION Utilities & Applications
.
Configuring SIMOTION D410
3.2 Inserting SIMOTION D410 into a project
SIMOTION Utilities &
is provided as part of the
41