Rep 7.3 Roll Feed Pinch Rolls - Xerox 8850 Service Manual

3
Remove the E-ring
2
Remove the Rewind
Internal Gear
Figure 1 Removing the Rewind Gears
8850/ 510DP
4
Remove the
Rewind Gear
1
Remove the E-ring

REP 7.3 Roll Feed Pinch Rolls

Parts List on PL 7.5
Switch off the Main Power Switch. Disconnect the Power Cord.
NOTE: All three Roll Feed Pinch Roll Assemblies are removed the same way.
Removal
1. Open the Roll Media Supply Drawer.
2. (Figure 1): Remove the Roll Feed Pinch Rolls.
03/2003
4-11
WARNING
Repairs and Adjustments
REP 7.2, REP 7.3