Rep 7.2 Rewind Gear And Rewind Internal Gear - Xerox 8850 Service Manual

1
Remove the screws (two at
each end)
2
Remove the Roll Media
Supply Drawer
Figure 2 Removing the Roll Media Supply Drawer
Repairs and Adjustments
REP 7.1, REP 7.2

REP 7.2 Rewind Gear and Rewind Internal Gear

Parts List on PL 7.3
Switch off the Main Power Switch. Disconnect the Power Cord.
NOTE: All three Rewind Gears and Rewind Internal Gear Assemblies are removed the same
way.
Removal
1. Pull out the Roll Media Supply Drawer.
2. Remove the roll of media.
3. (Figure 1): Remove the Rewind Gear and the Rewind Internal Gear.
03/2003
4-10
WARNING
8850/ 510DP