Rep 9.13 Sump Shield - Xerox 8850 Service Manual

REP 9.13 Sump Shield

Parts List on PL 9.7
Switch off the Main Power Switch. Disconnect the Power Cord.
Removal
1. Remove the Developer Module and Toner Cartridge
2. (Figure 1): Remove the Sump Shield.
Repairs and Adjustments
REP 9.13
WARNING
(REP 9.5).
1
Remove the two
screws
5
Remove the Sump
Shield from the Printer
Figure 1 Removing the Sump Shield from the Developer Module
03/2003
4-88
2
Loosen the two screws
3
Remove the Top
Shield
4
Remove the Sump
Shield from under the
edge (full length)
8850/ 510DP