Xerox 8850 Service Manual page 314

17. (Figure 13): Reinstall the sump shield, dispenser end first.
1
Position the sump shield in
the sump by rotating it
around the plunger
Figure 13 Reinstalling the sump shield
General Procedures
Installation Procedure
2
Reinstall the edges of the shield
under the edge on the housing
03/2003
6-28
18. (Figure 14): Disengage the Developer drive.
Figure 14 Disengaging the Developer Drive
1
Slide Gear Locking Retainer
away from the gear and latch
into the unlock position
8850/ 510DP