Xerox 8850 Service Manual page 162

Replacement
1. Reinstall the Toner Cartridge Home Sensor.
2. Perform the Toner Cartridge Home Sensor Adjustment
1
Reinstall the Cartridge
Drive Plate with the
seal up
2
Reinstall the gear
5
Reinstall the E-ring
Repairs and Adjustments
REP 9.12
To avoid damage to the Drive Plate Seal, always rotate the drive plate in the direction shown in
[Figure 2].
(ADJ 9.5).
3.
Seal
3
Rotate while per-
forming step 4
Figure 2 Reinstalling the Cartridge Drive PLate
03/2003
4-86
CAUTION
(Figure 2): Reinstall the Cartridge Drive Plate.
4
Position the tab at the
bottom
6
Reinstall the motor, the two
mount screws and the Ground
Wire
8850/ 510DP