Xerox 8850 Service Manual page 317

25. (Figure 19): Adjust the side-to-side level of the Printer.
1
2
Rotate the bolts to adjust Repeat Step 1 at the other
the level of the Printer end of the Printer
Figure 19 Adjusting the side-to-side level
8850/ 510DP
26. (Figure 20): Adjust the front-to-rear level of the Printer.
Rotate the bolts equally to
adjust the level of the
Printer.
Figure 20 Adjusting the front-to-rear level of the Printer
03/2003
6-31
General Procedures
Installation Procedure