Rep 9.6 Cartridge Drive Motor - Xerox 8850 Service Manual

REP 9.6 Cartridge Drive Motor

Parts List on PL 9.8
Switch off the Main Power Switch. Disconnect the Power Cord.
Removal
1. Remove the Developer Module. Perform
2. (Figure 1): Remove the Cartridge Drive Motor from the Developer Module.
3
Remove the Cartridge Drive
Motor Assembly from the
Developer Module
1
Disconnect P/J P1 (attached to
motor)
Figure 1 Removing the Cartridge Drive Motor
3. (Figure 2): Remove the Cartridge Drive Motor from the Mounting Plate.
Repairs and Adjustments
REP 9.6
WARNING
REP 9.5 Developer Module.
2
Remove the two motor mount
screws and attached ground strap
Ground Strap
4
Remove the Mounting Plate
1
Remove the E-ring
Figure 2 Removing the Cartridge Drive Motor from the Mounting Plate
03/2003
4-70
3
Remove the three screws
2
Remove the Drive Gear
8850/ 510DP