Xerox 8850 Service Manual page 228

Adjustment
1. Perform the check.
3
Straighten the wires and adjust the
sensor
2
Remove the wires
from the clamps (2
places)
Repairs and Adjustments
ADJ 9.5
NOTE: The Toner Cartridge Home Sensor is threaded. The wires must be disconnected and
straightened in order to rotate the sensor for adjustment.
2. (Figure 2): Adjust the Toner Cartridge Home Sensor to 2.5 (± 0.5) mm from the plate.
1
Disconnect Q2
Figure 2 Adjusting the Toner Cartridge Home Sensor
03/2003
4-152
2.5 +/- 0.5 mm
8850/ 510DP