Xerox 8850 Service Manual page 153

5. (Figure 7): Reinstall the Top Shield, taking care not to overtighten the screws.
2
Reinstall the
screws (2)
Figure 7 Reinstalling the Top Shield
6. (Figure 1): Reinstall the Sump Filter onto the Developer Module.
7. Reinstall the Developer Module (REP
8850/ 510DP
3
Tighten the screws (2), being
careful not to drive the screws
through the Top Shield
1
Reinstall the Top
Shield
9.5).
03/2003
4-77
Repairs and Adjustments
REP 9.7