Xerox 8850 Service Manual page 148

4. (Figure 2): Dump the Developer Material.
2
Rotate the gear
counterclockwise
Figure 2 Dumping the Developer Material
Repairs and Adjustments
REP 9.7
Do not rotate the Auger Gears individually more than the slight amount required for removal or
to mesh the teeth during reinstallation. If the factory setting of the augers is changed during the
procedure, perform the adjustment procedure, Augers
Magnetic Roll
1
Rotate the
Developer
Module
03/2003
4-72
CAUTION
(ADJ 9.6).
8850/ 510DP