Xerox 8850 Service Manual page 4

CHANGE HIGHLIGHTS
Section 1: No Changes for 510dp
Section 2: No Changes for 510dp
Section 3: No changes for 510dp
Section 4:
Revised REP 3.1 to remove P193 Cover instead of the Controller for 510dp.
Add new repair procedure REP 3.3 510dp Control Panel.
Revised REP 7.1 Media Supply Drawer to add note that Drawers 2 and 3 are optional on
510dp.
Revise REP 7.9 Media Drive Motor to add new Media Drive Chain reference for 8850 W/Tag 11
and 510dp.
Revise REP 14.1Top Cover to show complete removal procedure and add 510dp differences.
Revised ADJ 3.2 Line Current Limit to add 115 VAC 20 Amp service for 510dp running 5 and 7
D/A1 size prints per minute..
Revised ADJ 10.2 Fuser Drive Interlock Switch 8850 W/O TAG 8. Interlock Switch is only
adjustable on 8850 without tag 8.
Added ADJ 10.3 Fuser Drive Motor. The Fuser Drive Motor is only adjustable on the 510DP.
Section 5: Updated to latest configuration for 8850 and added SPS 510 dp differences.
Section 6:
Revised System and Configuration table to include 510dp differences.
Revised the Installation Procedure to include 510dp differences.
Updated Product Specification to include the 510dp differences.
Section 7:
Revised BSDs 7.2, 7.3, and 7.4 to show new A3P609 connector wiring for 710dp.
Corrected Part List reference for Sheet Feed components