Rep 9.12 Toner Cartridge Home Sensor; Repairs And Adjustments - Xerox 8850 Service Manual

REP 9.12 Toner Cartridge Home Sensor

Parts List on PL 9.7
Switch off the Main Power Switch. Disconnect the Power Cord.
Removal
1. Remove the Developer Module (REP
2. Remove the Cartridge Drive Plate (REP
NOTE: The Toner Home Sensor is threaded. The wires must be straightened in order to rotate
the sensor for removal.
3. (Figure 1): Remove the Toner Cartridge Home Sensor.
4
Remove the Toner Cartridge Home Sensor from
the threaded mount hole
3
Straighten the
wires
2
Remove the wire from
the fastener
Figure 1 Removing the Toner Cartridge Home Sensor
8850/ 510DP
WARNING
9.5).
9.14).
1
Disconnect P1
03/2003
4-85

Repairs and Adjustments

REP 9.12