3.
(Figure 2): Rotate the Registration Support Assembly back to expose the Registration
Pinch Rolls.
Registration Pinch Rolls
Registration Support Assembly
Figure 2 Rotating the Registration Support Assembly
8850/ 510DP
4.
(Figure 3): Remove the Registration Pinch Rolls.
4
Remove the
two rolls and
spring by slid-
ing out the
2
shaft
Remove the two bearings
(one at each end)
Figure 3 Removing the Registration Pinch Rolls
03/2003
4-41
3
1
Remove the two
Remove the two E-
inner E-rings
rings (one at each end)
Repairs and Adjustments
REP 8.12