Fault And Alarm Messages; General Information About Faults And Alarms - Siemens SINAMICS S120 Commissioning Manual
With startdrive
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
5.4
Fault and alarm messages
5.4.1
General information about faults and alarms
The errors and states detected by the individual components of the drive system are
indicated by messages.
The messages are categorized into faults and alarms.
Note
The individual faults and alarms are described in Chapter "Faults and alarms" in the
SINAMICS S120/S150 List Manual. Function diagrams for the fault buffer, alarm buffer, fault
trigger and fault configuration are also contained in the Section "Function diagrams" - "Faults
and alarms".
Note
Additional support for faults and warnings
The Startdrive online help allows you to call additional help for every displayed message via
the question mark symbol in the inspector window on the "Diagnostics" tab (refer to the
section "Help for messages and diagnostics (Page 55)").
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Diagnostics
5.4 Fault and alarm messages
357
Advertisement
Table of Contents
