Making Basic Settings; Starting The Safety Commissioning - Siemens SINAMICS S120 Commissioning Manual
With startdrive
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
Commissioning
4.10 Safety Integrated commissioning
4.10.2
Making basic settings
4.10.2.1
Starting the safety commissioning
Requirement
For safety reasons, you can only set the safety-relevant parameters of the 1st channel offline
for Startdrive. To set the safety-relevant parameters of the 2nd channel, the drive must be
online. The settings are protected by a password.
Icon
Activating safety settings
1. Click the "Go online" icon.
2. Click the
The dialog for the password input opens.
3. Enter the password.
You only have to enter a new password at the first start to replace the default password.
4. Click "OK" to accept the settings.
The safety commissioning is activated.
222
Description
Startdrive is not online.
Startdrive is online. The processing mode is not activated yet.
Startdrive is online. The processing mode is active. In addition to the safety mark-
ing, a "pin"
is displayed in the secondary navigation.
icon in the toolbar of the parameterization editor.
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Advertisement
Table of Contents
