Ss1 (Extended Functions) - Siemens SINAMICS S120 Commissioning Manual
With startdrive
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
Commissioning
4.10 Safety Integrated commissioning
4.10.4.3
SS1 (extended functions)
Make the settings for the motor deceleration in the "Safe Stop 1" (SS1) screen form. The
"SS1" function brakes the motor, monitors the magnitude of the motor deceleration within
specified limits, and after a delay time or violation of a speed threshold, triggers the "STO"
function.
Comparison of settings for motor deceleration
Settings
SS1 with SAM and OFF3 (with/without
encoder)
SS1 with SAM and OFF3 (with/without
encoder) and STO of the Basic Functions
via onboard terminals
SS1 with SAM and OFF3 (with/without
encoder) and SS1 of the Basic Functions
via onboard terminals
SS1 with SBR and OFF3 (with encoder)
236
Method of operation
Braking is monitored with the "Safe Acceleration Monitor" function.
•
The delay time starts after the function has been selected (p9556). If SS1
•
is deselected again within this time, the STO function is selected and de-
selected immediately again after the delay time has expired or if the speed
drops below the shutdown speed; i.e. the SS1 function is terminated nor-
mally. It cannot be interrupted.
Parameters r9773.4 (SBC requested) and r9773.1 (STO selected in the
•
drive) display the current status of the function.
Braking is monitored with the "Safe Acceleration Monitor" function.
•
The delay time starts after the function has been selected (p9556). If SS1
•
is deselected again within this time, the STO function is selected and de-
selected immediately again after the delay time has expired or if the speed
drops below the shutdown speed; i.e. the SS1 function is terminated nor-
mally. It cannot be interrupted.
Parameters r9773.4 (SBC requested) and r9773.1 (STO selected in the
•
drive) display the current status of the function.
The drive decelerates along the OFF3 ramp (p1135) once "Safe Stop 1" is
•
selected and switches to "Safe Torque Off" (STO) once the delay time set
in p9652 has elapsed.
Braking is monitored with the "Safe Acceleration Monitor" function.
•
The delay time starts after the function has been selected (p9556). If SS1
•
is deselected again within this time, the STO function is selected and de-
selected immediately again after the delay time has expired or if the speed
drops below the shutdown speed; i.e. the SS1 function is terminated nor-
mally. It cannot be interrupted.
Parameters r9773.4 (SBC requested) and r9773.1 (STO selected in the
•
drive) display the current status of the function.
The drive decelerates along the OFF3 ramp (p1135) once "Safe Stop 1" is
•
selected and switches to "Safe Torque Off" (STO) once the delay time set
in p9652 has elapsed.
Braking is monitored with the "Safe Brake Ramp" function.
•
The drive brakes with the OFF3 ramp (p1135) once "Safe Stop 1" is se-
•
lected and switches to "Safe Torque Off" (STO) once the delay time has
elapsed (p9556) or when the shutdown speed is undershot (p9560).
Parameters r9773.4 (SBC requested) and r9773.1 (STO selected in the
•
drive) display the current status of the function.
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Advertisement
Table of Contents
