Commissioning
4.4 Creating a project offline in Startdrive
4.4.6.1
Inserting and specifying motors from the motor list
Inserting and specifying a motor
You can insert motors in unspecified form using the hardware catalog.
1. Open "Motors" in the hardware catalog.
The following motor types are available for selection:
– DRIVE-CLiQ motors
– Induction motors
– Synchronous motors
– Reluctance motors
– Motor data input (motor data must be entered manually, see Chapter "Inserting and
2. Select the unspecified motor in the device overview.
Figure 4-29
114
specifying motors that are missing from the motor list (Page 117)").
Motor selected
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1