Selecting The Unit Of Temperature; Contrast Of Display On The Operator Unit; Display Of Bus Fault Status Messages; Text Entries - Siemens Synco RMZ792 Basic Documentation

Setting
Note
Setting
Setting
Entries
Building Technologies
HVAC Products
• With the bus operator unit, it is also possible to change the language of a bus user
(Synco™ 700 controllers type RMx7...). The language is selected via the device list
on the respective menu of the bus user. If the selected language does not exist with
the bus user, a change to English is made.
8.3

Selecting the unit of temperature

The units of temperature that can be selected for the bus operator unit are °C (or K)
and °F:
Main menu > Settings > Device
Operating line
Unit
Temperatures are always displayed with the unit selected on the bus operator unit,
independent of the settings made by the various bus users.
8.4

Contrast of display on the operator unit

The contrast of the display can be matched to the environmental conditions.
Main menu > Settings > Device
Operating line
Contrast
8.5

Display of bus fault status messages

The following parameter defines the fault status messages displayed on the menu or
info page Fault status message bus.
Main menu > Settings > Faults
Operating line
Fault status message bus
• Device list only:
Fault status messages are only displayed by devices contained on the device list.
• All devices:
Fault status messages are displayed by all Synco™ devices on the Konnex network.
Faults of devices not contained on the device list can neither be acknowledged nor
reset; also, they are not indicated by the fault LED.
8.6

Text entries

Both the device name of the bus operator unit and the business card can be freely
defined. The device name is shown on the start menu, the 4 text lines of the business
card are displayed in the form of an info picture.
Main menu > Settings > Texts
Operating line
Device name
Business card line 1
Business card line 2
Business card line 3
Business card line 4
Bus operator unit RMZ792
8 General settings
Range
°C / °F
Range
0...100 %
Range
Device list only / All
devices
Range
Max. 20 characters
Max. 20 characters
Max. 20 characters
Max. 20 characters
Max. 20 characters
Factory setting
°C
Factory setting
50 %
Factory setting
Device list only
Factory setting
37/52
CE1P3113en
03.04.2006