Inserting And Specifying A Motor Module - Siemens SINAMICS S120 Commissioning Manual

With startdrive

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Inserting and specifying a Motor Module

Using the hardware catalog, you insert a Motor Module in an unspecified form.

1. Open "Motor Modules" in the hardware catalog.

A selection can be made from the following Motor Modules:

– Single Motor Modules

– Double Motor Modules

2. Select the required, unspecified Motor Module in the device overview.

Commissioning with Startdrive

Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1

Motor Module selected

4.4 Creating a project offline in Startdrive

Commissioning