Voltage Sensing Module Vsm10; Terminal Modules; Terminal Module Tm15 - Siemens SINAMICS S120 Commissioning Manual

Diagnostics
5.2 Diagnostics using LEDs
5.2.3.6

Voltage Sensing Module VSM10

Table 5- 27 Meanings of the LEDs on the Voltage Sensing Module VSM10
LED Color
READY –
Green
Orange
Red
Green/red Flashing
Green/
orange
or
Red/
orange
5.2.4

Terminal Modules

5.2.4.1

Terminal Module TM15

Table 5- 28 Meanings of the LEDs on the Terminal Module TM15
LED Color
READY -
Green
Orange
Red
Green/
red
326
Status Description, cause
Off The electronics power supply is missing or outside the
permissible tolerance range.
Continuous The component is ready for operation. Cyclic DRIVE-CLiQ
light communication is taking place.
Continuous DRIVE-CLiQ communication is being established.
light
Continuous This component has at least one fault.
light
Note:
LED is controlled irrespective of the corresponding mes-
sages being reconfigured.
Firmware is being downloaded.
light 0.5 Hz
Flashing Firmware download is complete. The system waits for
light 2 Hz POWER ON.
Flashing Detection of the component via LED is activated (p0144 =
light 1).
Note:
Both options depend on the LED status when component
recognition is activated.
Status
Off The electronics power supply is missing or outside the per-
missible tolerance range.
Continuous The component is ready for operation. Cyclic DRIVE-CLiQ
light communication is taking place.
Continuous DRIVE-CLiQ communication is being established.
light
Continuous This component has at least one fault.
light
Note:
The LED is activated irrespective of whether the correspond-
ing messages have been reconfigured.
Flashing Firmware is being downloaded.
light 0.5 Hz
Flashing Firmware download is complete. The system waits for
light 2 Hz POWER ON.
Description, cause
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Remedy
–
–
–
Remove and
acknowledge the fault.
–
Carry out a POWER
ON.
–
Remedy
–
–
–
Correct and
acknowledge the
fault.
–
Carry out a POWER
ON.
Commissioning with Startdrive