Inserting And Specifying A Power Module - Siemens SINAMICS S120 Commissioning Manual

Commissioning
4.4 Creating a project offline in Startdrive
4.4.5.2

Inserting and specifying a Power Module

You can add a Power Module in unspecified form via the hardware catalog.
1. Open the "Power Modules" item in the hardware catalog.
The following Power Modules are available for selection:
– AC Power Module
2. Select the required, unspecified Power Module in the device overview.
Figure 4-21
3. Drag the unspecified Power Module into the device view.
Figure 4-22
The DRIVE-CLiQ connection is automatically established.
106
Power Module selected
Power Module inserted
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1