Siemens SINAMICS S120 Commissioning Manual page 250

With startdrive

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Commissioning

4.10 Safety Integrated commissioning

Configuring the brake test via test stop selection

1. Select the "Test stop selection" setting in the "Select SBT" drop-down list.

2. Select the direction of the test torque for SBT in the "Test direction" drop-down list.

3. Select the "Test motor holding brake" setting in the "Brake 1" drop-down list.

4. Select the "Disable" setting in the "Brake 2" drop-down list.

5. Set the following information in the input fields for Brake 1:

– Test duration (p10211[0])

– Holding torque (p10209[0])

– Position tolerance (p10212[0])

– Ramp time (p10209[0])

– Factor (p10210[0])

6. Click "Save project" in the toolbar to save the changes in the project.

Commissioning with Startdrive

Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1