Siemens SINAMICS S120 Commissioning Manual page 387

Icon
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
Description
Vertical zoom selection
Selects an vertical range with the left mouse key pressed. The display is scaled to
the range selection.
Horizontal zoom selection
Selects a horizontal range with the left mouse key pressed. The display is scaled
to the range selection.
Display all
Scale the display of the available data so that the entire time range and all values
are displayed.
Note
When activating a zoom function, the dynamic progress display of a running trace
is kept. You activate the progress display using this button.
Zoom in
Enlargement of the display. The ranges of the time axis and value axis are re-
duced every time the button is clicked. The curves are displayed larger.
Zoom out
Reduction of the display. The ranges of the time axis and value axis are increased
every time the button is clicked. The curves are displayed smaller.
Automatic scaling
Scaling of the display so that all values are displayed for the currently displayed
time range.
If signal groups are parameterized in the signal table, then for each signal group,
the minimum and maximum values of the Y scale are determined. As a conse-
quence, the automatic scaling is always applied to the signal group, and not to the
individual signals of the signal group.
Arrange in tracks
Signals are arranged below one another without any overlap.
Unit changeover of the time axis
Units are changed over between time and cycles.
Display samples
The samples are displayed as small circles on the curves.
Display vertical measurement cursors
The vertical measurement cursor is displayed. The vertical position of the two
measurement cursors can be moved using the mouse. The associated measured
values and the difference of the measurement cursors corresponding to the posi-
tion are shown in the signal table.
Display horizontal measurement cursors
Display of the horizontal measurement cursors. The horizontal position of the two
measurement cursors can be moved with the mouse.
Display chart legend
Showing or hiding of the legend in the curve diagram and the bit track labels.
Align the chart legend to the left
Display of the legend and the bit track labels on the left side of the curve diagram.
A.4 Shortcut menus and icons in Startdrive
Appendix
387