Danfoss VLT FC 100 Series Programming Manual page 95

®
VLT HVAC Drive Programming Guide
* Logic OR
[3]
NB!
This parameter is active only when
8-54 Reversing Select
Option:
* Digital input
[0]
[1] Bus
[2] Logic AND
[3] Logic OR
NB!
This parameter is active only when
8-55 Set-up Select
Option:
[0] Digital input
[1] Bus
[2] Logic AND
*
Logic OR
[3]
NB!
This parameter is active only when
8-56 Preset Reference Select
Option:
[0] Digital input
[1] Bus
[2] Logic AND
* Logic OR
[3]
NB!
This parameter is active only when
Activates Start command via the fieldbus/serial communication port OR via one of the digital inputs.
par. 8-01 Control Site is set to [0]
Function:
Select control of the frequency converter reverse function via the terminals (digital input) and/or via the fieldbus.
Activates Reverse command via the serial communication port or fieldbus option.
Activates Reverse command via the fieldbus/serial communication port, AND additionally via one of the digital
inputs.
Activates Reverse command via the fieldbus/serial communication port OR via one of the digital inputs.
par. 8-01 Control Site
is set to [0]
Function:
Select control of the frequency converter set-up selection via the terminals (digital input) and/or via the fieldbus.
Activates the set-up selection via the serial communication port or fieldbus option.
Activates the set-up selection via the fieldbus/serial communication port, AND additionally via one of the digital
inputs.
Activate the set-up selection via the fieldbus/serial communication port OR via one of the digital inputs.
par. 8-01 Control Site
is set to [0]
Function:
Select control of the frequency converter Preset Reference selection via the terminals (digital input) and/or via
the fieldbus.
Activates Preset Reference selection via the serial communication port or fieldbus option.
Activates Preset Reference selection via the fieldbus/serial communication port, AND additionally via one of the
digital inputs.
Activates the Preset Reference selection via the fieldbus/serial communication port OR via one of the digital
inputs.
par. 8-01 Control Site
is set to [0]
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
3. Parameter Description
Digital and control word .
Digital and control word
.
Digital and control word
.
Digital and control word
.
3
95