Danfoss VLT FC 100 Series Programming Manual page 38

3. Parameter Description
*
0 [0-4]
0-83 Additional Non-Working Days
Array with 15 elements [0]-[14] displayed below parameter number in display. Press OK and Step between elements by means of
the LCP.
3
*
0 [0-14]
0-89 Date and Time Readout
Option:
38
Defines dates for additional working days that normally would be non-working days according to par. 0-81
Working Days .
Defines dates for additional non-working days that normally would be working days according to par. 0-81
Working Days
.
Function:
Displays the current date and time. The date and time is updated continuously.
The clock will not begin counting until a setting different from default has been made in par. 0-70.
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
®
VLT HVAC Drive Programming Guide
▲
and
▼
buttons on