Danfoss VLT FC 100 Series Programming Manual page 152

3. Parameter Description
18-34 Analog Output X42/9
Range:
*
00.0 [0 – 30.000]
18-35 Analog Output X42/11
Range:
3
*
00.0 [0 – 30.000]
152
Function:
Read out of the value of the signal applied to terminal X42/9 on the Analog I/O Card.
The value shown reflects the selection in par. 26-50.
Function:
Read out of the value of the signal applied to terminal X42/11 on the Analog I/O Card.
The value shown reflects the selection in par. 26-60.
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
®
VLT HVAC Drive Programming Guide