Main Menu - Frequency Converter Information - Group - Danfoss VLT FC 100 Series Programming Manual

®
VLT HVAC Drive Programming Guide

3.15. Main Menu - Frequency Converter Information - Group 15

3.15.1. 15-** Drive Information
Parameter group containing frequency converter information such as operating data, hardware configuration and software versions.
3.15.2. 15-0* Operating Data
Parameter group containing operating data e.g. Operating Hours, kWh counters, Power Ups, etc.
15-00 Operating Hours
Range:
*
0h [0 - 2147483647 h]
15-01 Running Hours
Range:
*
0h [0 - 2147483647 h]
15-02 kWh Counter
Range:
*
0kWh [0 - 2147483647 kWh]
15-03 Power Up's
Range:
*
0 [0 - 2147483647]
15-04 Over Temp's
Range:
*
0 [0 - 65535]
15-05 Over Volt's
Range:
*
0 [0 - 65535]
15-06 Reset kWh Counter
Option:
*
Do not reset
[0]
[1] Reset counter
NB!
The reset is carried out by pressing [OK].
Function:
View how many hours the frequency converter has run. The value is saved when the frequency converter is
turned off.
Function:
View how many hours the motor has run. Reset the counter in par. 15-07. The value is saved when the frequency
converter is turned off.
Function:
Registering the power consumption of the motor as a mean value over one hour. Reset the counter in par. 15-06.
Function:
View the number of times the frequency converter has been powered up.
Function:
View the number of frequency converter temperature faults which have occurred.
Function:
View the number of frequency converter overvoltages which have occurred.
Function:
Do not reset
Select [0] if no reset of the kWh counter is desired.
Reset
Select [1] and press [OK] to reset the kWh counter to zero (see par 15-02).
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
3. Parameter Description
133
3