Danfoss VLT FC 100 Series Programming Manual page 241

®
VLT HVAC Drive Programming Guide
5. Parameter Lists
5.1. Parameter Options
5.1.1. Default settings
Changes during operation
"TRUE" means that the parameter can be changed while the frequency converter is in operation and "FALSE" means that the frequency converter must
be stopped before a change can be made.
4-Set-up
'All set-up': the parameter can be set individually in each of the four set-ups, i. e. one single parameter can have four different data values.
'1 set-up': data value will be the same in all set-ups.
Conversion index
This number refers to a conversion figure used when writing or reading by means of a frequency converter.
Conv. index 100 67
Conv. factor 1 1/60
Data type Description
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible String
33 Normalized value 2 bytes
35 Bit sequence of 16 boolean variables
54 Time difference w/o date
6 5 4 3
1000000 100000 10000 1000
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
2 1 0 -1 -2
100 10 1 0.1 0.01
5. Parameter Lists
-3 -4 -5 -6
0.001 0.0001 0.00001 0.000001
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
5
241