Danfoss VLT FC 100 Series Programming Manual page 138

3. Parameter Description
15-32 Alarm Log: Time
Array [10]
*
0 [0 - 2147483647]
3.15.6. Drive Identification, 15-4*
3
Parameters containing read only information about the hardware and software configuration of the frequency converter.
15-40 FC Type
Option:
15-41 Power Section
Option:
15-42 Voltage
Option:
15-43 Software Version
Option:
15-44 Ordered Typecode String
Option:
15-45 Actual Typecode String
Option:
15-46 Frequency Converter Ordering No
Option:
15-47 Power Card Ordering No
Option:
138
View the time when the logged event occurred. Time is measured in seconds from frequency converter start-up.
Function:
View the FC type. The read-out is identical to the frequency converter series power field of the type code defi-
nition, characters 1-6.
Function:
View the FC type. The read-out is identical to the frequency converter series power field of the type code defi-
nition, characters 7-10.
Function:
View the FC type. The read-out is identical to the frequency converter series power field of the type code defi-
nition, characters 11-12.
Function:
View the combined SW version (or 'package version') consisting of power SW and control SW.
Function:
View the type code string used for re-ordering the frequency converter in its original configuration.
Function:
View the actual type code string.
Function:
View the 8-digit ordering number used for re-ordering the frequency converter in its original configuration.
Function:
View the power card ordering number.
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
®
VLT HVAC Drive Programming Guide