Danfoss VLT FC 100 Series Programming Manual page 156

3. Parameter Description
20-07 Feedback 3 Conversion
Option:
20-08 Feedback 3 Source Unit
Option:
3
20-12 Reference/Feedback Unit
Option:
[0] None
* %
[1]
[5] PPM
[10] 1/min
[11] RPM
[12] Pulse/s
[20] l/s
[21] l/min
[22] l/h
[23] m 3 /s
[24] 3
m /min
[25] m 3 /h
[30] kg/s
[31] kg/min
[32] kg/h
[33] t/min
[34] t/h
[40] m/s
[41] m/min
[45] m
[60] °C
[70] mbar
[71] bar
[72] Pa
[73] kPa
[74] m WG
[80] kW
[120] GPM
[121] gal/s
[122] gal/min
[123] gal/h
[124] CFM
[125]
ft 3 /s
[126] 3
ft /min
156
Function:
Feedback 1 Conversion
See , par. 20-01 for details.
Function:
Feedback 1 Source Unit
See , par. 20-02 for details.
Function:
This parameter determines the unit that is used for the setpoint reference and feedback that the PID Controller
will use for controlling the output frequency of the frequency converter.
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
®
VLT HVAC Drive Programming Guide