Danfoss VLT FC 100 Series Programming Manual page 110

3. Parameter Description
[16-66 ] Digital Output [bin]
[16-67 ] Freq. Input #29 [Hz]
[16-68 ] Freq. Input #33 [Hz]
[16-69 ] Pulse Output #27 [Hz]
[16-70 ] Pulse Output #29 [Hz]
[16-71 ] Relay Output [bin]
[16-75 ] Analog In X30/11
3
[16-76 ] Analog In X30/12
[16-77 ] Analog Out X30/8 [mA]
[16-84 ] Comm Option STW
[16-85 ] FC Port CTW 1
[16-90] Alarm Word
[16-91 ] Alarm Word 2
[16-92 ] Warning Word
[16-93 ] Warning Word 2
[16-94 ] Extended Status Word
[16-95 ] Extended Status Word
2
[16-96 ] Prev.
Word
10-13 Warning Parameter
Range:
*
0 [0 - 65535]
Bit:
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
10-14 Net Reference
Read only from LCP.
*
Off
[0]
[1] On
10-15 Net Control
Read only from LCP.
110
Maintenance
Function:
View a DeviceNet-specific Warning word. One bit is assigned to every warning. Please refer to the DeviceNet
Operating Instructions (MG.33.DX.YY) for further information.
Meaning:
Bus not active
Explicit connection timeout
I/O connection
Retry limit reached
Actual is not updated
CAN bus off
I/O send error
Initialization error
No bus supply
Bus off
Error passive
Error warning
Duplicate MAC ID Error
RX queue overrun
TX queue overrun
CAN overrun
Select the reference source in Instance 21/71 and 20/70.
Enables reference via analog/digital inputs.
Enables reference via the fieldbus.
MG.11.C5.02 - VLT
®
VLT HVAC Drive Programming Guide
® is a registered Danfoss trademark