Danfoss VLT FC 100 Series Programming Manual page 201

®
VLT HVAC Drive Programming Guide
23-81 Energy Cost
Range:
*
0.00 [0.00 - 999999.99]
23-82 Investment
Range:
*
0.00 [0.00 - 999999.99]
23-83 Energy Savings
Range:
*
0 kWh [0-0 kWh]
23-84 Cost Savings
Range:
*
0.00 [0 - 0]
Function:
Set the actual cost for a kWh in local currency. If the energy cost is changed later on it will impact the calculation
for the entire period!
Function:
Set the value of the investment spent on upgrading the plant with speed control, in same currency as used in
Energy Cost
par. 23-81, .
Function:
This parameter allows a readout of the accumulated difference between the reference power and the actual
output power.
If motor size set in Hp (par. 1-21), the equivalent kW value will be used for the Energy Savings.
Function:
This parameter allows a readout of the calculation based on the above equation (in local currency).
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
3. Parameter Description
201
3