Danfoss VLT FC 100 Series Programming Manual page 198

3. Parameter Description
23-60 Trend Variable
Option:
* Power [kW or HP]
[0]
3
[1] Current [A]
[2] Frequency [Hz]
[3] Motor Speed [RPM]
23-61 Continuous Bin Data
Range:
*
0 [0 - 4.294.967.295]
23-62 Timed Bin Data
Range:
*
0 [0-4294967295]
23-63 Timed Period Start
Range:
*
2000-01-01 00:00
00:00 - 2099-12-31 23:59]
198
Function:
Select the desired operating variable to be monitored for Trending.
Power yielded to the motor. Reference for the relative value is the rated motor power programmed in
Motor Power [kW ] or
16-11, Power [Hp]
Output current to the motor. Reference for the relative value is the rated motor current programmed in
1-24, Motor Current
Output frequency to the motor. Reference for the relative value is the maximum output frequency programmed
in par. 4-14, Motor Speed High Limit [Hz]
Speed of the motor. Reference for relative value is the maximum motor speed programmed in
Speed High Limit
.
Function:
Array with 10 elements ([0]-[9] below parameter number in display). Press OK and step between elements by
▲ ▼
means of and
10 counters with the frequency of occurrence for the operating variable monitored, sorted according to the
following intervals:
Counter [0]: 0% - <10%
Counter [1]: 10% - <20%
Counter [2]. 20% - <30%
Counter [3]: 30% - <40%
Counter [4]: 40% - <50%
Counter [5]: 50% - <60%
Counter [6]. 60% - <70%
Counter [7]: 70% - <80%
Counter [8]. 80% - <90%
Counter [9]: 90% - <100% or Max
The above minimum limits for the intervals are the default limits. These can be changed in par. 23-65,
Bin Value
.
Starts to count when the frequency converter is powered up for the first time. All counters can be reset to 0 in
par. 23-66, Reset Continuous Bin Data
Function:
Array with 10 elements ([0]-[9] below parameter number in display). Press OK and step between elements by
▲ ▼
means of and
10 counters with the frequency of occurrence for the operating data monitored sorted according to the intervals
Continuous Bin Data
as for par. 23-61,
Starts to count at the date/time programmed in par. 23-63,
programmed in par. 23-64,
Data .
Function:
Set the date and time at which the Trending starts the update of the Timed Bin counters.
[2000-01-01
MG.11.C5.02 - VLT
par. 1-21, Motor Power [HP] . Actual value can be read in
.
. Actual value can be read in par. 16-14, Motor Current
Actual value can be read in
buttons on the LCP.
.
buttons on the LCP.
.
Timed Period Stop
. All counters can be reset to 0 in par. 23-67,
® is a registered Danfoss trademark
®
VLT HVAC Drive Programming Guide
par. 16-10, Power [kW]
.
par. 16-13, Frequency .
par. 4-13, Motor
Timed Period Start
, and stops at the time/date
Reset Timed Bin
par. 1-20,
or par.
par.
Minimum