Danfoss VLT FC 100 Series Programming Manual page 147

®
VLT HVAC Drive Programming Guide
3.16.7. 16-8* Fieldbus & FC Port
Parameters for reporting the BUS references and control words.
16-80 Fieldbus CTW 1
Range:
*
0 [0 - 65535]
16-82 Fieldbus REF 1
Range:
*
0 [-200 - 200]
16-84 Comm. Option STW
Range:
*
0 [0 - 65535]
16-85 FC Port CTW 1
Range:
*
0 [0 - 65535]
16-86 FC Port REF 1
Range:
*
0 [0 - 0]
3.16.8. 16-9* Diagnosis Read-Out
Parameters displaying alarm, warning and extended status words.
16-90 Alarm Word
Range:
*
0 [0 - FFFFFFFF]
16-91 Alarm Word 2
Range:
*
0 [0 - FFFFFFFF]
16-92 Warning Word
Range:
*
0 [0 - FFFFFFFF]
16-93 Warning Word 2
Range:
*
0 [0 - FFFFFFFF]
Function:
View the two-byte Control word (CTW) received from the Bus-Master. Interpretation of the Control word depends
on the fieldbus option installed and the Control word profile selected in par. 8-10.
For more information please refer to the relevant fieldbus manual.
Function:
View the two-byte word sent with the control word form the Bus-Master to set the reference value.
For more information please refer to the relevant fieldbus manual.
Function:
View the extended fieldbus comm. option status word.
For more information please refer to the relevant fieldbus manual.
Function:
View the two-byte Control word (CTW) received from the Bus-Master. Interpretation of the control word depends
on the fieldbus option installed and the Control word profile selected in par. 8-10.
Function:
View the two-byte Status word (STW) sent to the Bus-Master. Interpretation of the Status word depends on the
fieldbus option installed and the Control word profile selected in par. 8-10.
Function:
View the alarm word sent via the serial communication port in hex code.
Function:
View the alarm word 2 sent via the serial communication port in hex code.
Function:
View the warning word sent via the serial communication port in hex code.
Function:
View the warning word 2 sent via the serial communication port in hex code.
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
3. Parameter Description
147
3