Danfoss VLT FC 100 Series Programming Manual page 34

3. Parameter Description
0-38 Display Text 2
3
Option:
0-39 Display Text 3
Option:
3.2.6. LCP Keypad, 0-4*
Enable, disable and password protect individual keys on the LCP keypad.
0-40 [Hand on] Key on LCP
Option:
[0] Disabled
*
Enabled
[1]
[2] Password
0-41 [Off] Key on LCP
Option:
[0] Disabled
* Enabled
[1]
[2] Password
0-42 [Auto on] Key on LCP
Option:
[0] Disabled
* Enabled
[1]
[2] Password
34
Display Line XXX
or par. 0-24, . Use the
buttons to move the cursor. When a character is highlighted by the cursor, it can be changed. Use the
▼
buttons on the LCP to change a character. A character can be inserted by placing the cursor between two
▲ ▼
characters and pressing or .
Function:
In this parameter it is possible to write an individual text string for display in the LCP or to be read via serial
communication. If to be displayed permanently select Display Text 2 in par. 0-20, par. 0-21, par. 0-22, par. 0-23
or par. 0-24, Display Line XXX . Use the
buttons to move the cursor. When a character is highlighted by the cursor, this character can be changed. A
character can be inserted by placing the cursor between two characters and pressing
Function:
In this parameter it is possible to write an individual text string for display in the LCP or to be read via serial
communication. If to be displayed permanently select Display Text 3 in par. 0-20, par. 0-21, par. 0-22, par. 0-23
Display Line XXX
or par. 0-24, . Use the
buttons to move the cursor. When a character is highlighted by the cursor, this character can be changed. A
character can be inserted by placing the cursor between two characters and pressing
Function:
No function
[Hand on] Key enabled
Avoid unauthorized start in Hand mode. If par. 0-40 is included in the My Personal Menu, then define the
password in par. 0-65 Personal Menu Password
word
.
Function:
No function
[Off] Key is enabled
Avoid unauthorized stop. If par. 0-41 is included in the My Personal Menu, then define the password in
0-65, Personal Menu Password
. Otherwise define the password in
Function:
No function
[Auto on] Key is enabled
Avoid unauthorized start in Auto mode. If par. 0-42 is included in the My Personal Menu, then define the pass-
par. 0-65, Personal Menu Password
word in
word
.
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
®
VLT HVAC Drive Programming Guide
▲ ▼
or buttons on the LCP to change a character. Use the
▲ ▼
or buttons on the LCP to change a character. Use the
▲ ▼
or buttons on the LCP to change a character. Use the
. Otherwise define the password in
par. 0-60, Main Menu Password
. Otherwise define the password in
◀ ▶
and
▲
or
◀ ▶
and
▲ ▼
or .
◀ ▶
and
▲ ▼
or .
par. 0-60 Main Menu Pass-
par.
.
par. 0-60, Main Menu Pass-