Danfoss VLT FC 100 Series Programming Manual page 140

3. Parameter Description
3.15.8. Parameter Info, 15-9*
Parameter lists
15-92 Defined Parameters
Array [1000]
3
*
0 [0 - 9999]
15-93 Modified Parameters
Array [1000]
*
0 [0 - 9999]
15-99 Parameter Metadata
Array [23]
*
0 [0 - 9999]
140
View a list of all defined parameters in the frequency converter. The list ends with 0.
View a list of the parameters that have been changed from their default setting. The list ends with 0. Changes
may not be visible until up to 30 seconds after implementation.
This parameter contains data used by the MCT10 software tool.
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
®
VLT HVAC Drive Programming Guide